Common Sewing Pop-Ups 4:18 - Pfaff creative vision Owner's Manual
Hide thumbs
Also See for creative vision:
- Owner's manual (21 pages) ,
- Mode settings manual (19 pages) ,
- Brochure (12 pages)
Table of Contents
Advertisement
Common sewing pop-ups
System busy
When the machine is loading, saving, moving fi les
or anything that takes time, an hour glass is shown.
Bobbin empty
When the bobbin is almost empty, the machine
stops automatically and a pop-up appears on the
screen. Replace the empty bobbin with a full one.
Note: It is possible to sew until the thread has run out.
Just continue sewing without closing the pop-up.
Check needle thread
The machine stops automatically if the needle
thread runs out or breaks. Re-thread the needle
thread, close the pop-up and start sewing again.
Remove Sensormatic buttonhole foot
The Sensormatic buttonhole foot needs to be
removed before doing any of the following:
•
Sewing a stitch that is not a buttonhole.
•
Sewing a buttonhole that can not be sewn with
the Sensormatic buttonhole foot.
•
Sewing an adjusted buttonhole saved without
the Sensormatic buttonhole foot in your
Personal menu.
4:18
- Quick Links:
- Threading the Machine
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the creative vision and is the answer not in the manual?
Questions and answers
when i thread the machine to pick up the bobbin thread it becomes stuck. it picks up the thread but i cant pull it through to the top, it becomes stuck
The Pfaff Vision sewing machine could get stuck when picking up the bobbin thread due to several reasons:
- Incorrect threading: The machine may not be threaded properly according to the instruction manual.
- Lint or dirt buildup: Dirt around the tension unit, especially in the discs, can cause issues.
- Damaged or wrong needle: A bent or incorrect needle can interfere with thread pickup.
- Incorrect bobbin threading or housing: The bobbin might not be threaded or placed correctly.
- Tension problems: Incorrect top thread or bobbin tension settings can cause jamming.
- Different threads: Using different threads for the top and bobbin can lead to looping and jams.
- Stitch length settings: An inappropriate stitch length for the fabric type may cause problems.
Checking and correcting these areas can help resolve the issue.
This answer is automatically generated