Pfaff creative vision Owner's Manual page 45

AutoSave current state
When AutoSave current state is selected, the
machine will save current state periodically while
embroidering and also when you stop embroidering.
The information about the embroidery will be saved
even after switching the machine off.
Note: If AutoSave current state is selected it can take longer
to go from Embroidery edit to Embroidery stitch-out.
Timer
Displays the total sewing and embroidery time of
your machine. Touch the icon to reset the timer.
Cut jump stitches
Your machine features the automatic function Cut jump
stitches. This function saves you time trimming after
the embroidery is completed. When Cut jump stitches is
selected your machine will trim the top jump stitch thread
and pull the thread end to the underside of the fabric as
you embroider.
Note: Your machine will also cut the thread after you have
changed to a new color. Hold the thread end when you
start embroidering again, so that you can easily remove the
thread end when cut.
Designs marked with this symbol are programmed
for Cut jump stitches. Jump stitch trim commands
can be added to any design using the 4D™
Organizer Software, included with your machine.
Automatic thread snips
When selected, the automatic thread snips is
activated. The threads are cut automatically and
the presser foot raises at color changes or when
an embroidery is fi nished. When deselected, no
automatic thread snips will be performed.
Automatic presser foot lift
When selected, the automatic presser foot lift is
activated. The presser foot will raise to pivot height
for example when stopping with the needle in the
down position. When deselected, the presser foot
will stay lowered even if the machine stops with the
needle in down position.
Defragment machine memory
To optimize the sewing and embroidery performance you
sometimes need to do a defragmentation. When that needs
to be done a pop-up message appears. To defragment
your machine fi rst remove unneccesary fi les then go to
the Machine Settings in the Settings menu and select
Defragment machine memory.
The defragmentation can take up to 45 minutes.
A B C
3:9