How To Launch The Programs - Pfaff creative vision Owner's Manual

7. During the installation process, if existing
drivers are found, you will be informed that
drivers have been removed and that the
computer must be restarted. Click OK to restart
the computer. Installation will resume after the
computer has restarted.
8. At the end of the installation, you will be
prompted to connect your embroidery
machine. Click Finish on the last page. Leave
your 4D™ Embroidery System software CD in
your computer.
9. The Found New Hardware wizard will appear.
Select 'No, not at this time' on the fi rst page,
then click Next. Select 'Install the software
automatically', then click Next. A warning will
appear that the drivers are not signed. This is
normal and should not be a cause for concern.
Click Continue Anyway, and the driver
installation will complete automatically.

How to launch the programs

Shortcuts on the Desktop
1. Double-click on the Shortcut to the 4D™
Embroidery System program folder. A list of
programs appears.
2. Double-click on 4D™ Organizer, 4D™
QuickFont or 4D™ Confi gure to launch it.
Alternatively use the Start Menu to open modules
under Start, All Programs, 4D™ Embroidery
System.
Viewing and printing PDF Guides
To fi nd all the Reference and Sample Guides for
your 4D™ Embroidery System software, go to
Start, All Programs, 4D™ Embroidery System
then choose Reference Guides or Sample Guides.
Choose relevant folder, then select the desired PDF
Guide. Double-click on the desired name to launch
the relevant .pdf fi le if you have Adobe Acrobat
installed on your computer. To install the Acrobat
Reader, insert the 4D™ Embroidery System CD
and select that option from the menu that appears.
2:14
Embroidery Machine Communication
module
The Embroidery Machine Communication
module must be active (
embroidery machine with your computer. The
icons are found in the lower right corner of your
computer screen. If the Embroidery Machine
Communication module is not active, it may be
started from the Send tab of 4D™ Confi gure.
How to update your machine
Be sure to consult the web site at www.pfaff.com
and/or your local authorized PFAFF® dealer
for updates and upgrades for your machine and
Owner's manual.
You can update your machine using the USB
embroidery stick or the USB cable packed with
your machine (P/N:412 62 59-04).
Updating instructions
• Go to the PFAFF® web site at www.pfaff.com
to fi nd information about available updates.
• Follow the update wizard to prepare your USB
embroidery stick for the update.
• While pressing and holding the stitch restart
button and needle up/down button, turn your
machine on to start in update mode. Follow
the instructions on the PFAFF® HD screen to
update.
or ) to use your