Pfaff creative vision Owner's Manual page 11

Presser feet
Presser foot 0A
Presser foot 1A
Presser foot 2A
Presser foot 3
Presser foot 4
Presser foot 5A
Presser foot 5M
Presser foot 6A
Presser foot 7
Presser foot 8
Important: Make sure that the IDT is disengaged when using presser foot 2A, 5A, 5M, 6A and 8.
Standard presser foot with IDT (attached on the machine
upon delivery)
This foot is used mainly for straight stitching and zigzag
stitching with a stitch length longer than 1.0mm.
Fancy stitch foot with IDT
This foot is used for decorative stitches. The groove on the
underside of the foot is designed to fl ow smoothly over
the stitches.
Fancy stitch foot
When sewing decorative stitches or short zigzag stitches
and other utility stitches with less than 1.0mm stitch
length, use this foot. The groove on the underside of the
foot is designed to fl ow smoothly over the stitches.
Blindhem foot with IDT
This foot is used for blindhem stitches. The toe on the foot
guides the fabric. The red guide on the foot is designed to
ride along the fold of the hem edge.
Zipper foot with IDT
This foot can be snapped on either the right or the left of
the needle, making it easy to sew close to both sides of the
zipper teeth. Move needle position to right or left to sew
closer to zipper teeth.
Sensormatic buttonhole foot
When connected to the machine, the buttonhole is sewn in
a suitable length to the button size that has been entered
into the machine.
Manual buttonhole foot
This foot is used for sewing manual buttonholes. Use the
markings on the foot to position the garment edge. The
fi nger on the back of the foot holds cording for corded
buttonhole.
Embroidery/Sensormatic free-motion foot
This foot is used for embroidery and free-motion sewing.
This foot can also be used for darning.
Rolled hem foot with IDT, 3mm
This foot is used to sew narrow hems in light to medium
weight fabric.
Maxi-stitch foot
This foot is used for side-motion stitches.
1:11