Getting Started Embroidering - Pfaff creative vision Owner's Manual
Hide thumbs
Also See for creative vision:
- Owner's manual (21 pages) ,
- Mode settings manual (19 pages) ,
- Brochure (12 pages)
Table of Contents
Advertisement
Getting started embroidering
1.
After attaching the embroidery unit and
embroidery foot, insert a bobbin with
lightweight bobbin thread.
Note: Make sure that the IDT is disengaged.
2.
Hoop a piece of fabric and slide on
3.
Open selection menu (A) to select a design.
Touch it once to load to embroidery edit.
4.
The machine automatically switches to
embroidery edit. The design is placed in the
center of the hoop.
5.
Switch from embroidery edit to embroidery
stitch-out by touching the embroidery toggle
icon (B) on the task bar.
6.
Thread the machine with the fi rst color in the
color list (C).
the hoop.
B
A
B
C
7:5
- Quick Links:
- Threading the Machine
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the creative vision and is the answer not in the manual?
Questions and answers
when i thread the machine to pick up the bobbin thread it becomes stuck. it picks up the thread but i cant pull it through to the top, it becomes stuck
The Pfaff Vision sewing machine could get stuck when picking up the bobbin thread due to several reasons:
- Incorrect threading: The machine may not be threaded properly according to the instruction manual.
- Lint or dirt buildup: Dirt around the tension unit, especially in the discs, can cause issues.
- Damaged or wrong needle: A bent or incorrect needle can interfere with thread pickup.
- Incorrect bobbin threading or housing: The bobbin might not be threaded or placed correctly.
- Tension problems: Incorrect top thread or bobbin tension settings can cause jamming.
- Different threads: Using different threads for the top and bobbin can lead to looping and jams.
- Stitch length settings: An inappropriate stitch length for the fabric type may cause problems.
Checking and correcting these areas can help resolve the issue.
This answer is automatically generated