Summary of Contents for Extron electronics TP T 15HD 45
Page 1
Extron Electronics, Japan Daisan DMJ Building 6F 3-9-1 Kudan Minami Chiyoda-ku, Tokyo 102-0074 Japan +81.3.3511.7655 Fax +81.3.3511.7656 TP T 15HD 45 and TP T A 45 Twisted Pair Video and Audio Transmitters 68-924-01 Rev. B Printed in the USA 09 04...
Precautions Safety Instructions • English Warning This symbol is intended to alert the user of important Power sources • This equipment should be operated only from the power source indicated on the product. This equipment is intended to be used with a main operating and maintenance (servicing) instructions power system with a grounded (neutral) conductor.
Step 2 Connect the UTP cable from the receiver to the 8-pin connector on the TP T 15HD 45. To wire the connector, see Rear Panel Connectors in chapter 2 for the pinout table. Do not connect the TP T 15HD 45 to a computer data or CAUTION telecommunications network.
The TP T 15HD 45 may be used as a stand-alone video module only without the TP T A 45. The TP T A 45 derives its power from the TP T 15HD 45. Step 6 Connect and power up all input and output devices, then apply power to the TP T 15HD 45 power supply and test for the display and/or audio outputs.
UTP cable or CAT 5/5e/6 UTP cable to a compatible TP or VTR receiver. An external 12 VDC power supply provides power to both the TP T 15HD 45 and the TP T A 45. The TP T A 45 inputs unbalanced audio through a 3.5 mm stereo phono jack and outputs digital audio to the TP T 15HD 45 transmitter.
12 VDC external power supply to the 2-pole female direct insertion captive screw connector. The TP T 15HD 45 and the TP T A 45 share a single power supply. Neither one can be remotely powered by the attached receiver.
Input only analog and line level audio signals on this connector. Cabling and Setup To install the TP T 15HD 45 and TP T A 45 models, follow these steps: Turn all of the equipment off and, if applicable, disconnect it from the power source.
Compatibilty with other Extron products As a pair, the TP T 15HD 45 and TP T A 45 are compatible with the following Extron receivers and matrix switchers: • TP R 15HD A •...
Install an SEQ 100 15HD Skew Equalizer on the receiver’s video output and adjust the skew for the leading video image. Mounting The TP T 15HD 45 and TP T A 45 are designed to fit into a wall- mountable or floor box-mountable 45 mm mounting frame. COMPUTER AUDIO...
3 NTSC/PAL composite video from a single source Connectors TP T 15HD 45 ... (1) 15-pin HD female (Mac and Sun/SGI to VGA adapters are available) Nominal level ... 1 V p-p for Y of component video and S-video, and for composite video 0.7 V p-p for RGB...
MTBF ... 30,000 hours Warranty ... 3 years parts and labor All nominal levels are at ±10%. Specifications are subject to change without notice. TP T 15HD 45 and TP T A 45 • Reference Information Parts Lists Included parts Description...
Page 13
Reference Information, cont’d TP T 15HD 45 and TP T A 45 • Reference Information...
Need help?
Do you have a question about the TP T 15HD 45 and is the answer not in the manual?
Questions and answers