Resetting And Disabling Ospf Settings - Extreme Networks 200 Series Installation And User Manual

Resetting and Disabling OSPF Settings

To return OSPF settings to their defaults, use the commands listed in Table 68.
Table 68: OSPF Reset and Disable Commands
Command
delete ospf area [<areaid> | all]
disable ospf
disable ospf export direct
disable ospf export rip
disable ospf export static
unconfig ospf {vlan <name> | area <areaid>} Resets one or all OSPF interfaces to the default
Summit 200 Series Switch Installation and User Guide
Description
Deletes an OSPF area. Once an OSPF area is
removed, the associated OSPF area and OSPF
interface information is removed. The backbone
area cannot be deleted. A non-empty area
cannot be deleted.
Disables OSPF process in the router.
Disables exporting of local interface (direct)
routes into the OSPF domain.
Disables exporting of RIP routes in the OSPF
domain.
Disables exporting of statically configured routes
into the OSPF domain.
settings.
Resetting and Disabling OSPF Settings
227