Extreme Networks 200 Series Installation And User Manual page 68

Managing the Switch
Table 19: RADIUS Commands (continued)
Command
config radius-accounting [primary | secondary]
server [<ipaddress> | <hostname>] {<udp_port>}
client-ip <ipaddress>
config radius-accounting [primary | secondary]
shared-secret {encrypted} <string>
disable radius
disable radius-accounting
enable radius
enable radius-accounting
show radius
show radius-accounting
unconfig radius {server [primary | secondary]}
unconfig radius-accounting {server [primary |
secondary]}
RADIUS RFC 2138 Attributes
The RADIUS RFC 2138 optional attributes supported are as follows:
• User-Name
• User-Password
• Service-Type
• Login-IP-Host
66
Description
Configures the RADIUS accounting server.
Specify the following:
• [primary | secondary] —
Configure either the primary or
secondary RADIUS server.
• [<ipadress> | <hostname>] —
The IP address or hostname of the
server being configured.
• <udp_port> — The UDP port to use
to contact the RADIUS server. The
default UDP port setting is 1646.
• client-ip <ipaddress> — The IP
address used by the switch to identify
itself when communicating with the
RADIUS server.
The accounting server and the RADIUS
authentication server can be the same.
Configures the authentication string used
to communicate with the RADIUS
accounting server.
Disables the RADIUS client.
Disables RADIUS accounting.
Enables the RADIUS client. When
enabled, all CLI logins are sent to the
RADIUS servers for authentication. When
used with a RADIUS server that supports
ExtremeWare CLI authorization, each CLI
command is sent to the RADIUS server for
authentication before it is executed.
Enables RADIUS accounting. The RADIUS
client must also be enabled.
Displays the current RADIUS client
configuration and statistics.
Displays the current RADIUS accounting
client configuration and statistics
Unconfigures the RADIUS client
configuration.
Unconfigures the RADIUS accounting
client configuration.
Summit 200 Series Switch Installation and User Guide