Extreme Networks 200 Series Installation And User Manual page 156

Ethernet Automatic Protection Switching
Table 37: show eaps Display Fields
Field
EAPS Enabled:
Number of EAPS instances:
EAPSD-Bridge links:
Name:
(Instance= )
State:
[Running: ...]
Enabled:
Mode:
Primary/Secondary port:
154
Description
Current state of EAPS on this switch:
• Yes—EAPS is enabled on the switch.
• no—EAPS is not enabled.
Number of EAPS domains created. There can only be
one EAPS domain on this platform.
The total number of EAPS bridge links in the system.
The maximum count is 255. Each time a VLAN is
added to EAPS, this count increments by 1.
The configured name for this EAPS domain.
The instance number is created internally by the
system.
On a transit node, the command displays one of the
following states:
• Idle—The EAPS domain has been enabled, but
the configuration is not complete.
• Links-Up—This EAPS domain is running, and both
its ports are up and in the FORWARDING state.
• Links-Down—This EAPS domain is running, but
one or both of its ports are down.
• Preforwarding—This EAPS domain is running, and
both of its ports are up, but one of them is in a
temporary BLOCKED state.
On a master node, the command displays one of the
following states:
• Idle—The EAPS domain has been enabled, but
the configuration is not complete.
• Complete—The ring is in the COMPLETE state for
this EAPS domain.
• Failed—There is a break in the ring for this EAPS
domain.
• Yes—This EAPS domain is running.
• No—This EAPS domain is not running.
Indicates whether EAPS is enabled on this domain.
• Yes—EAPS is enabled on this domain.
• no—EAPS is not enabled.
The configured EAPS mode for this switch: transit or
master.
The port numbers assigned as the EAPS primary and
secondary ports. On the master node, the port
distinction indicates which port is blocked to avoid a
loop.
Summit 200 Series Switch Installation and User Guide