Summit 200-24 Switch Physical Features; Summit 200-24 Switch Front View - Extreme Networks 200 Series Installation And User Manual

Summit 200 Series Switch Overview
• Access-policy support for routing protocols
• Access list support for packet filtering
• Access list support for rate-limiting
• IGMP snooping to control IP multicast traffic
• Load sharing on multiple ports
• RADIUS client and per-command authentication support
• TACACS+ support
• Network login
• Console command-line interface (CLI) connection
• Telnet CLI connection
• SSH2 connection
• Simple Network Management Protocol (SNMP) support
• Remote Monitoring (RMON)
• Traffic mirroring for ports

Summit 200-24 Switch Physical Features

The Summit 200-24 switch is a compact enclosure (see Figure 1) one rack unit in height (1.75 inches or
44.45 mm) that provides 24 autosensing 10BASE-T/100BASE-TX ports using RJ-45 connectors. It also
provides two 10/100/1000BASE-T Gigabit Ethernet uplink ports using RJ-45 connectors and two optical
ports that also allow Gigabit Ethernet uplink connections through Extreme 1000BASE-SX, 1000BASE-LX,
or 1000BASE-ZX Small Form Factor pluggable (SFP) Gigabit Interface Connectors (GBICs)—also known
as mini-GBICs—using LC optical fiber connectors.

Summit 200-24 Switch Front View

Figure 1 shows the Summit 200-24 switch front view.
Figure 1: Summit 200-24 switch front view
10/100 Mbps ports Mini-GBIC Unit stacking Console
port status LEDs ID LED port
1000-baseT ports Mini-GBIC ports
LC24001A
NOTE
See Table 5 for information about supported mini-GBIC types and distances.
16 Summit 200 Series Switch Installation and User Guide