Resetting And Disabling Router Settings - Extreme Networks 200 Series Installation And User Manual

Table 58: Router Show Commands
Command
show iparp {<ipaddress | vlan <name> |
permanent}
show iparp proxy {<ipaddress> {<mask>}}
show ipconfig {vlan <name>}
show ipconfig {vlan <name>} {detail}
show ipfdb {<ipaddress> <netmask> | vlan
<name> }
show iproute {priority | vlan <vlan> | permanent |
<ipaddress> <netmask> | origin [direct | static |
blackhole | rip | bootp | icmp | ospf-intra |
ospf-inter | ospf-as-external | ospf-extern1 |
ospf-extern2]} {sorted}
show ipstats {vlan <name>}

Resetting and Disabling Router Settings

To return router settings to their defaults and disable routing functions, use the commands listed in
Table 59
Table 59: Router Reset and Disable Commands
Command
clear iparp {<ipaddress> | vlan <name>}
clear ipfdb {<ipaddress> <netmask> | vlan
<name>]
disable bootp vlan [<name> | all]
disable bootprelay
disable icmp address-mask {vlan <name>}
disable icmp parameter-problem {vlan
<name>}
disable icmp port-unreachables {vlan
<name>}
disable icmp redirects {vlan <name>}
Summit 200 Series Switch Installation and User Guide
Description
Displays the IP Address Resolution Protocol
(ARP) table. You can filter the display by IP
address, VLAN, or permanent entries.
Displays the proxy ARP table.
Displays configuration information for one or
all VLANs.
Displays IP configuration settings.
Displays the contents of the IP forwarding
database (FDB) table. If no option is
specified, all IP FDB entries are displayed.
Displays the contents of the IP routing table
or the route origin priority.
Displays IP statistics for the CPU of the
system.
Description
Removes dynamic entries in the IP ARP table.
Permanent IP ARP entries are not affected.
Removes the dynamic entries in the IP
forwarding database. If no options are specified,
all IP FDB entries are removed.
Disables the generation and processing of
BOOTP packets.
Disables the forwarding of BOOTP requests.
Disables the generation of an ICMP
address-mask reply messages. If a VLAN is not
specified, the command applies to all IP
interfaces.
Disables the generation of ICMP
parameter-problem messages. If a VLAN is not
specified, the command applies to all IP
interfaces.
Disables the generation of ICMP port
unreachable messages. If a VLAN is not
specified, the command applies to all IP
interfaces.
Disables the generation of ICMP redirect
messages. If a VLAN is not specified, the
command applies to all IP interfaces.
Resetting and Disabling Router Settings
203