Rip - Extreme Networks 200 Series Installation And User Manual

Reviewing ExtremeWare Vista Statistical Reports
Figure 79: Utilization Averages

RIP

This window provides statistics about the Routing Information Protocol (RIP) both at the global (switch
level) and at the interface level. At the switch level, the Global Routing Information Protocol Statistics
table shows the number of route changes and the number of queries. As shown in Figure 80, at the
interface level, the Router Interface Statistics table shows the following fields:
VLAN Name
Authentication—Yes for enabled, no for disabled on the interface
Rcvd Pkts—Received RIP packets
Sent Pkts—Sent RIP packets
Rcvd Bad Pkts—Received bad RIP packets
Rcvd Bad Routes—Received bad routes
Sent Trig Updts—Sent triggered updates
Peer
Age (sec)—Age in seconds
Version—RIP version
Bad Pkts—Bad Packets
Summit 200 Series Switch Installation and User Guide 287