Mini-Gbic Type And Hardware/Software Support; Mini-Gbic Type And Specifications - Extreme Networks 200 Series Installation And User Manual

Serial Number
Use this serial number for fault-reporting purposes.
MAC Address
This label shows the unique Ethernet MAC address assigned to this device.
NOTE
The Summit 200-48 switch certification and safety label is located on the bottom of the switch.

Mini-GBIC Type and Hardware/Software Support

The Summit 200 series switch supports the SFP GBIC, also known as the mini-GBIC, in three types: the
SX mini-GBIC, which conforms to the 1000BASE-SX standard, the LX mini-GBIC, which conforms to the
1000BASE-LX standard, and the ZX mini-GBIC, a long-haul mini-GBIC that conforms to the IEEE 802.3z
standard. The system uses identifier bits to determine the media type of the mini-GBIC that is installed.
The Summit 200 series switches support only the SFP mini-GBIC.
NOTE
Only mini-GBICs that have been certified by Extreme Networks (available from Extreme Networks)
should be inserted into the mini-GBIC receptacles on the Summit 200 series switch.
This section describes the mini-GBIC types and specifications.

Mini-GBIC Type and Specifications

Table 5 describes the mini-GBIC type and distances for the Summit 200 series switches.
Table 5: Mini-GBIC types and distances
Standard
1000BASE-SX
(850 nm optical window)
1000BASE-LX
(1310 nm optical window)
1000BASE-ZX
(1550 nm optical window)
Summit 200 Series Switch Installation and User Guide
Media Type
50/125 µm multimode fiber
50/125 µm multimode fiber
62.5/125 µm multimode fiber
62.5/125 µm multimode fiber
50/125 µm multimode fiber
50/125 µm multimode fiber
62.5/125 µm multimode fiber
10/125 µm single-mode fiber
10/125 µm single-mode fiber
Mini-GBIC Type and Hardware/Software Support
Maximum
Mhz•Km Distance
Rating (Meters)
400 500
500 550
160 220
200 275
400 550
500 550
500 550
— 5,000
— 50,000
23