Table of Contents
Advertisement
Operating
JVC's Audio/Video
Components
You can operate
JVC's audio and video components
with this receiver's
remote
control,
since control
signals for JVC's
components
are preset
in the remote control.
IMPORTANT:
To operate
JVC's
audio components
using this remote
control:
• You need to connect
JVC's
audio components
through the
COMPU
LINK (SYNCHRO)
jacks
(see page 43) in addition
to
the connections
using cables
with RCA pin plugs (see pages 8 and
9).
• Aim the remote
control
directly
at the remote
sensor on the
receiver.
• If you use the bunons
on the front panel to choose
a source,
the
remote
control
will not operale
that source. To operate
a source
with the remole
control,
the source must be selected
using source
selecting
buttons
on the remole
control.
• To operate
a cassette
deck or MD recoMer
using the COMPU
LINK remote
control
system,
set the source
name correctly.
(See
page
17.)
• Refer also to the manuals
supplied
with your components.
OO
c ) @
(Y).@
_EEP
o
_
o
|STO_
JVC
RM-SRX_OJ
_MOTE C_
_L
Note:
When you press one of the source selecting buttons, the
operation mode appears on the display window For example,
the above illustration shows the remote control now works for
CD operation.
Buttons
Indleations
FM/AM
TUNER
CD
CD
CDR
CDR
PHONO
PHONO
TAPE/MD
TAPE
V _" VCR1
_
"rAPE •
CONTROL (repeatedly)*
,J
CDDSC <
CDR
SOUND
SOUND
By pressing
CONTORL repeatedly, you can select "VCRI,"
"TAPE," "CDR" or "CDDSC" as the source.
51
Tuner
You can always
perform
the folk)wing
operations:
FM/AM
:Alternate between
FM and AM.
After pressing
FM/AM,
you can perform
the following
operations:
1 - 10, +10
: Select a preset channel number directly.
For channel number 5, press 5.
For channel number 15, press +10, then 5.
For channel number 20, press +10, then 10.
TUNING UP/DOWN
:Tune into stations.
FM MODE
:Change the FM reception
mode.
Sound
control
section
(Amplifier]
You can always
perform
the folk)wing
operations:
SURROUND
:Turn on and select Surround
modes
DSP
:Turn on and select DSP modes.
SURR/DSP
OFF
:"Turn off Surround and DSP modes.
After pressing
SOUND,
you can perform
the following
operations:
FRONT.L
then LEVEL +/-
:Adjust tbe left front speaker output
FRONToR then LEVEL +/-
CENTER then LEVEL +/-
SURR,L then LEVEL +/-
SURR*R then LEVEL +/-
SBACK,L then LEVEL +/-
SBACK,R then LEVEL +/-
SUBWFR then LEVEL +/-
DIGITAL EQ then LEVEL+/-
TEST
BASS BOOST
Note:
level. "FRL" appears on tbe display.
:Adjust the right front speaker output
level. "FRR" appears on the display.
:Adjust the center SlX_akeroutput level.
"CTR" appears on the display.
:Adjust the left surround speaker output
level. "SURRU'
appears on the display.
:Adjust the right surround speaker output
level. "SURRR"
appears on the display.
:Adjust the left sun'ound back speaker
output level. "SBKL" appears on the
display.
:Adjust the right surround back speaker
output level. "SBKR" appears on the
display.
:Adjust the subwoofer
output level.
"S-WFR"
appears on tbe display.
: Select the audio band and a(t}ust its
frequency
level "EQ" appears on tbe
display.
:Turn on or off the lest tone output.
:Turn on or off Bass Boost function.
After adjusting sounds, press the corresponding
source selecting
button to operate your target source by using the 10 keys; otherwise,
the 10 keys cannot be used for operating your target source,
Afler pressing
CD, you can perform
the following
operations
on the
CD player:
PLAY
• STOP
II PAUSE
1-10,+10
:Star_ playing.
:Return to the beginning of the current (or previous)
track.
:Skip to the beginning
of the next track.
:Stop playing.
:Pause playing. "[b resume press I_ PLAY.
:Select a track nmnber directly.
For track number 5, press 5.
For track number
15, press +10, then 5.
For track nmnber 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
Advertisement
Table of Contents
