Table of Contents
Advertisement
ll
TEXT COMPU LINK Remote Control System
The TEXT COMPU LINK remote
control system
has been developed to deal with the disc information
recorded
in the
CD Text* and MDs. Using these information
in the discs, you can operate
a CD player or MD recorder
equipped with
the TEXT COMPU LINK remote
control
system through
the receiven
Connections:
To use this remole control system, you need to connect a CD player
and/or MD recoMer you want to operate, following the procedures
below.
1. If you have already plugged
your CD player, MD
recorder,
and this receiver into the AC outlets,
unplug their AC power cords first.
2. Connect
your CD player, MD recorder,
and this
receiver as follows,
through the COMPU
LINK
jacks and TEXT COMPU
LINK jacks.
1)
COMPU
LINK
jacks:
Use the cables
with the monaural
mini-plugs
(not supplied
with this receiver).
CD player
I
MD recorder
_
_LINK
4
2)
TEXT
COMPU
LINK jacks:
Use the cables
with the
stereo mini-plugs
(not supplied
with this receiver).
CD player
MD recorder
Itxi
3. Connect
your CD player, MD recorder
and this
receiver, using the cables with RCA pin plugs (see
page 9).
4. Plug the AC power cords of these components
into the AC outlets.
5. Turn on the connected
components
first, then
turn on this receiver.
Functions:
This remote
control
system
allows
you to use the functions
listed
below.
Showing
the
Disc Information
on the
TV screen
Disc information
such as its performer
and disc title (and track titles
only when a CD Text is selected)
is shown on the TV screen.
Searching
for a Disc:
Only for the CD Player
This remote
control
system
can allow you to search for discs fly the
performer,
disc title, and music genre.
With this disc search,
you can easily find the disc you want to play.
Entering
the Disc Information
If your CD player
or MD recorder
has the disc memory
function,
you can input the following
information
about
the normal audio
CDs
or MDs on the TV screen.
• For CDs: Performer,
disc title, and music genre
• For MDs:Disc
title and song titles
*What is a CD Text?
In a CD Text, some information
about the disc (its disc title, performer,
composer, arranger, etc,) is recorded.
Notes:
• If your audio component has two COMPU LINK jacks, you can use
either one, If it has only one COMPU LINK jack, connect it so that it
is the last item in the series of components, (For example, the CD
player in the diagram in the left column.)
• If your audio component has two TEXT COMPU LINK jacks, you
can use either one, If it has only one TEXT COMPU LINK jack,
connect it so that it is the last item in the series of components.
(For
example, the CD player in the diagram in the left column,)
• "TEXT COMPULINK
SOURCE NOT CONNECTED"
appears on the
display in the following cases:
- When the connections
explained in the left column are not
correctly done.
- When you try to use the TEXT COMPULINK
function a few
seconds after you turn on the connected equipment.
This is not a malfunction
of the units.
• Refer also to the manuals supplied with your CD player or MD
recordell
IMPORTANT:
If you turn on the receiver before turning on the other components
after connecting the components,
the TEXT COMPU LINK remote
control system does not work correctly.
If this happens:
1. Turn off all the components
including this receiver.
2. Turn on the connected components.
3. Turn on this receiver.
44
Advertisement
Table of Contents
