Table of Contents
Advertisement
You can ac[just the Surround
and DSP sound parameters
to your
preference.
• Once you have made ac[justment,
it is memorized
for each source.
•
Adiustable
parameters
You call adjust the folk)wing
parameters:
For Surround, DAP, JVC Theater Surround and All Channel
Stereo modes (when the center speaker is connected)
CENTER
TONE
: Ac[just the center tone. As the number
(CTR TONE)
increases,
the dialogue
becomes
clearer so
that the human
voices change from soft to
sharp. (Normally
select "3." A(!justable range:
Ira5)
For DAP modes
and JVC Theater
Surround
EFFECT
LEVEL
: Adjust the DAP effect level
As the
(EFFECT)
number
increases,
the DAP effect
becomes
stronger.
(Normally
select "37
Ac/justahle
range:
1 to 5)
ROOM
SIZE
: Adjust the virtual
room size. As the
(ROOMSIZE)
nmnber
increases,
the interval
between
reflections
increases
so thai you will feel
as if you were in a larger room. (Normally
select "37 Adjustable
range:
1 to 5)
LIVENESS
: At/just the liveness
effect. As the number
increases,
the attenuation
level of
reflections
over time decreases
so that
acoustics
change
from "Dead"
to "Live."
(Normally
_Iect "3Y A(!justable range: 1 to 5)
Note:
You can only adjust the Effect Level when using a DAP mode with
the 3D-PHONIC
indicator lights up,
For Pro Logic I1 Music
only
PANORAMA
: Select "ON" to add "wraparound"
sound
(PNRAMA)
effect with side-wall
image.
(Initial
control
setting:
"OFF")
CENTER
WIDTH
: Adjust the center channel localization
(CWIDTH)
between
the center speaker and the left/
right speakers.
As the number
increases,
the
center channel
sound moves toward the left
and right speakers.
(Normally select "3?'
Adiustable
range: OFF and I to 7)
DIMENSION
: Adjust
sound localization
position.
As the
number
increases,
the sound localization
moves
towards
forwaM
from backwaM.
(Normally
_Iect "42' A([justable range: 1 to 7)
Using the or_screen display (through the remote control]:
1. Show EFFECT
ADJUST
menu (see page 38).
EFFECT
AOJUST
i_
{_EFI_EOT
LEVE_
i
ROOM
SIZE
3
LIVENESS
3
CENTER
TONE
3
PANORAMA
OFF
CENTER
WIDTH:
3
DIMENSION
:
4
_:
OPERATE
Parameters that are not adjustable for the currently
selected Surround and DSP modes are skipped.
2. Press • or • to move _
to a parameter
you
want to adjust.
3. Press < or _ to adjust the parameter.
4. Repeat steps 2 and 3 to adjust the other
parameters.
5. When
you finish, press EXIT
repeatedly
until the
menu disappears
from the TV.
On the
front
paneh
Before you start,
rememher...
There is a time limit in doing
the following
steps. If the setting is
canceled
before you finish, start fi-om step 1 again.
1. Press EFFECT
repeatedly
to select a
EFFECT
parameter
you want to adjust.
• Each time you press the button,
the items change
as follows:
EFFECT --* ROOMSIZE'-"
LIVENESS "-"
CTR (cente 0 TONE-_
PNRAMA (Panorama) --,
C (center) WIDTH--,
DIMENSION
--*
(Back to the beginning)
Parameters
that are not adjustable for the currently selected
Surround and DSP modes are skipped.
2. Press CONTROL
UP • or
DOWN
• to adjust the sound
parameter.
CONTROL
DOWN
UP
3. Repeat steps 1 and 2 to adjust the other
parameters.
Note:
Parameters that are not adjustable for the currently selected Surround
and DSP modes are skipped.
42
Advertisement
Table of Contents
