Table of Contents
Advertisement
You can at/just the speaker
output levels. The lest tone can be also
output from each speaker
except
subwoofer
to check
the output level
balance
when using the Surround
mode.
• Once you have made ac[justment,
it is memorized
for each source.
• When using the bullons
on the front panel to ac[just output
level
for the Surround
mode, no test tone is available.
•
Adjustable
speakers
You can at/just the following
speakers'
output
levels within the
range of-10
dB to +10 dB ("0 dB" is the initial
setting):
SUBWFR
: Select this to at/just the subwoofer
output level.
FRONT
L (FRNT
L) : Select this to at/just the left front
speaker
output
level.
CENTER
: Select this to at/just the center
speaker
output
level.
FRONT
R (FRNT
R) : Select this to at/just the right front
speaker
output
level.
SURR
R
: Select this to ac[just the right
surround
speaker
output level.
S BACK
R (SBK R) * : Select this to ac[just the right
surround
back speaker
output
level.
S BACK
L (SBK L)
: Select this to at/just the left surround
or S BACK*
back speaker
output level.
SURR
L
: Select this to at/just the left surround
speaker
output
level.
Using the on_scroen
display (through
the remote
controll:
Ac/justment
is also possible
without
outputting
the test tone. In this
case, you can skip steps 2, 3 and 7 below.
1. Show LEVEL
ADJUST
menu (see page 38).
.
3.
C]_TEST
TO_E
:
i
8UBWFR
0_
FRONT
L
0_
CENTER
0_
FRONT
R
0_
BURR
R
0_
8
BACK
R:
0_
$
BAOK
L:
0_
BURR
L
:
0_
_:OPERATE
Note:
* If you have selected "ISPK" for the surround back speaker (see
4.
page 22), "S BACK" appears instead of"S BACK (SBK) L" and
"S BACK (SBK) R." No test tone outputs from the right surround
back speake_
5.
• If you have selected "NO" or "NONE" for a speaker (see page
22), the output level for the corresponding
speaker cannot be
adjustable,
• Thecenterandleftanddghtsurroundspeakers'output!evels
6.
are adjustable for DVD MULTI playback mode, even though
"NONE" is selected for the speaker settings,
• Speaker output levels except that of the subwoofer are not
7.
adjustable when Analog Direct is in use.
Press • or • to move _
to "TEST
TONE."
Press < or _ to select "ON"
to check if you can
hear the sounds through all the speakers
at equal
level.
A lest tone comes out of the
speakers
(only
if the
speakers
are
activated)
in the
following
order:
FRONT L (Left front speaker) -* CENTER (Center speaker) --*
FRONT R (Right front speaker)
--*
SURR R (Right surround speaker)
--*
S BACK R (Right surround back speaker)*
--*
S BACK L (Leftsurroundback
speaker) or
S BACK (Surround back speaker)*
--*
SURR L (Left surround speaker)
--* (Back to the beginning)
* If you have selected "ISPK" for the surround back speaker (see
page 22), "S BACK"appears
instead of "S BACK L" and
"S BACK R." No test tone outputs from the dght surround back
speaker.
Press • or • to move _
to a speaker
you want
to adjust.
Press < or _ to adjust the speaker
output level
(-10 dB to +10 dB).
Repeat steps 4 and 5 to adjust the other speakers
output levels.
After the adjustment
is finished,
press • or • to
move _
to "TEST
TONE," then select "OFE"
8. Press EXIT
repeatedly
until the menu disappears
from the TV.
Notes:
• Ifyouhaveselected"NO"or"NONE"foraspeaker(seepage22),
test tone does not come out of the corresponding
speake_
• Subwooferoutputlevelcannotbeadjustedwhenoutputtingtest
tone. When you adjust the subwoofer output level, select "OFF" for
"TEST TONE."
• Test tone does not output through the speakers when selecting
DVD MULT!,
40
Advertisement
Table of Contents
