Table of Contents
Advertisement
Enhancing
your
audio
system
You can use this receiver as the pre-amplifier (control amplifier)
when you connect power amplifiers to the PRE OUT jacks on the
mar panel using cables with RCA pin plugs (not supplied).
Connect the white plug to the audio left jack, and the red plug to the
audio right jack.
Left front
Right front
speaker_
I
Power amplifier
I
Center
speaker
I
Power amplifier
J
6
You can connect
the folk)wing
audio/video
components
to this
receiver.
Refer also to the manuals
supplied
with your components.
Audio
Components
• Turntable
• CD player*
• Cassette
deck or
MD recoMer*
• CD recorder*
• Personal
computer
(PC)
Video Components
• VCRs (VCR
I and VCR 2)
• Video camera
• TV*
• DBS tuner*
• DVD player*
/
You can connect these components using the methods described in
"Analog Connections" (see below and page 14) and in "Digital
Connections" (see page 13).
•
Analog Connections
Audio component connections
Use the cables
with RCA pin plugs (not supplied).
Connect
the white plug to the audio
left jack, and the red plug to the
audio right jack.
CAUTION:
If you connect a sound-enhancing
device such as a graphic equalizer
between the source components and this receiver, the sound output
through this receiver may be distorted.
SUBWOOFER
L J
Power
amplifier
T
Left surround
speaker
I
Power amplifier
I
Left
/
Right
Surround
back speakers
Right surround
speaker
Note:
If you have selected
"I SPK" for the surround back speaker quantity
(see page 22), connect the surround back speaker to the SURR
BACK L (left) jack,
I Turntable ]
Turntable
PHOHQ
Note:
This connection is for the turntable with an MM (moving-magnet) type
cartridge,
Any turntables incorporating
a small-output
cartridge such as an MC
(moving-colt)
type must be connected to this receiver through a
commercial head amplifier or step-up transforme_ Direct connection
may result in insufficient volume,
8
Advertisement
Table of Contents
