Use Setup Settings - Honeywell VisionPRO 8000 Owner's Manual

VisionPRO TM 8000 Touchscreen Programmable Thermostat
2. Press and hold the center blank key for approximately
five seconds until the screen changes.
4. See the screen below to review how the thermostat
keys are used during the User Setup. See Table 5 for
the User Setup numbers and settings.
M22439
Release the center blank key when the screen on the
thermostat matches the screen below.
(
4o
F- ADVANCE TO NEXT
/ USER SETUP
USER SETUP _ /
NUMBER _ _ r-CURRENT
i
USER SETUP CURRENT
SETTING M19922
5. Press the Done key to exit the User Setup screen.
Table 5. User Setup Settings.
User
Setup User Setup
Number Name Settings
0120 Date (first two Select first two digits of
digits of year) current calendar year (20
for year 2005, etc)
0130 Date (last two Select last two digits of
digits of year) current calendar year (05
for year 2005, etc)
0140 Date (month) Select number of current
calendar month (1-12)
0150 Date (day) Select number of current
calendar date (1-31)
0160 Schedule options 0iNon-programmable
417-day programmable
(factory setting)
0320 Display 0I°F setting (factory
temperature setting)
in °F or °C li°C setting
0330 Daylight savings liDaylight savings is on
time (factory setting)
0iDaylight savings is off
68-0280 22