Fan Schedule; Fan Control - Honeywell VisionPRO 8000 Owner's Manual

VisionPRO TM 8000 Touchscreen Programmable Thermostat
NOTE: To reinstate a schedule period, press arrow keys to
set desired time and temperatures.
OK TO PICK MULTIPLE DAYS
_ HFAT
m m COOL
/oo.,;/
M19957
7. Press Done key.
Fan Schedule
Press Fan key while in the Scheduling Screen to program the
System Fan. Choices available from the Scheduling Screen:
Auto (default position)--fan runs with equipment.
Programmable for all schedule periods (Wake, Leave, Return
and Sleep).
On--fan runs continuously (programmable for all schedule
periods).
Circ--fan runs randomly for approximately 35% of schedule
period (programmable for all schedule periods).
I_ OK TO PICK MULTIPLE DAYS _lw_ [_
M22447
Fan Control (Table 7)
If the Fan program is scheduled, Auto is shown and any
programmable mode that is set; for example, if during Wake
period, Fan is set to Auto, only Auto is shown in the Fan area.
However, if during the Wake period, fan is scheduled to On,
both Auto and On are shown. Auto indicates fan is running its
schedule; On indicates Fan schedule is set to On.
THU
Following
SYSTEM Schedule
Ii--M t --IA_
ILl" 7 I
M19962
Table 7. Fan Program Operation and Screen Status.
Fan
Fan Call Status
Fan Program for Energize shown on
Setting Schedule Action Terminal Screen
Auto Auto None None Auto
Auto On Fan G Auto/On
Auto Circ None None Auto/Circ
Auto Circ Fan G Auto/Circ
25 68-0280