Specialty Cycles; Washer Communicated Cycles - GE Profile DPVH890 Owner's Manual & Installation Instructions

About the dryer control panel.
Specialty Cycles
1. Turn the CYCLE knob to SPECIAL CYCLES. A list of cycle options will appear in the display.
2. Using the cursor buttons, select a CATEGORY.
3. Using the cursor buttons, select a CYCLE.
Press the BACK button to take you back to the CATEGORIES.
4. Press ENTERto select.
5. Press the START/PAUSE button.
SPECIALTYCYCLESinclude:
Garments
Coots
m Hosierg/Bras (use mesh bag)
m Jeans
m Khakis
Bed end Beth
m Blankets (Cotton)
m Comforters
m Sheets
mTowels
Other Specialty
mAir Fluff
m Drgel
m Fleece
m Fragile Cotton
m Performance Fabrics
m Pet Bedding
m Play Clothes
m Sleeping Bags
m Rack Dry
mThrow Rugs
Washer Communicated Cycles
To turn on communication, press the
SETTINGSbutton on the washer control
panel. When "DRYERLINK"appears in the
display, press ENTER.Using the arrow keys,
select ON; then press ENTER.
When the washer cycle is completed, the
washer will communicate with the dryer
when any button on the control panel is
touched or the door is opened.
The washer will display, "TRANSFERRING
CYCLEINFORMATION TO THE DRYER"and
the dryer will display, "RECEIVINGCYCLE
INFORMATION TO THE DRYER".
The dryer will only communicate with the
washer if the dryer is not running a cycle.
If the washer starts a new cycle before the
dryer has a chance to communicate with
it, the information will be lost.
8