Reverse Door Handle And Caps - GE Profile DPVH890 Owner's Manual & Installation Instructions

Installation Instructions
[_] REVERSE DOOR HANDLE
AND CAPS
A Lay the chrome cover down on a soft,
protected, flat surface so that the inner part
faces upward (resting on the handle side).
Disassemble the door cap from the chrome
cover on the handle side by removing 2 screws
(#8 x 0.625" tapping screws).
2xD
Screws
Doorcap
B Disassemble the inner handle from the outer
handle bg removing 3 screws (#8 x 0.625"
tapping screws). Disassemble the outer handle
from the chrome cover bg removing 4 screws
(#8 x 0.625" tapping screws).
3xD
Screws
(inner
_ndle)
Outer
handle
[_] REVERSE DOOR HANDLE
AND CAPS (CONT.}
C Pop the 2 handle caps out toward you and
reassemble on the opposite side of the chrome
cover, where gou removed the outer handle.
D Assemble the outer handle onto the opposite
side of the chrome cover, using 4 screws
(#8 x 0.625" tapping screws).
Outer
handle
35