Final Setup; Level The Dryer; Attach Serial Cable; Grounding Instructions - GE Profile DPVH890 Owner's Manual & Installation Instructions

Installation Instructions
FINAL SETUP
[] LEVEL THE DRYER
Stand the dryer upright near the final location and
adjust the four leveling legs at the corners to ensure
that the dryer is level from side to side and front
to rear.
Raise Lower
[_[] ATTACH SERIAL CABLE
Attach the serial cable for washer and dryer
connection to the serial port on the back of
the dryer.
Attach the other end of the cable to the washer
before pushing the washer into its final position.
SerialPort
Rearof
Dryer
r_ PLUG DRYER IN
'_!_,Ensure proper
z-'__:::_I _ I "ground exists
L__J before use.
[_] GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event
of malfunction or breakdown, grounding will
reduce the risk of electric shock by providing
U path of least resistance for electric current.
This appliance is equipped with U cord having on
equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
r_ DRYER STARTUP
Press the POWER button.
POWER
NOTE: If the dryer has been exposed to
temperatures below freezing for an extended
period of time, allow it to warm up before pressing
POWER. Otherwise, the display will not come on.
The dryer is now ready for use.
SERVICING
-A WARNING - Label all w ires
prior
to disconnection when servicing controls. Wiring
errors can
cause improper and
dangerous
operation
after
servicing/installation.
For replacement parts and other information,
refer to the buck cover for servicing phone
numbers.
31