Important Safety Information; If You Smell Gas; Proper Installation; Exhaust/Ducting - GE Profile DPVH890 Owner's Manual & Installation Instructions

IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
WARNING!
For your safety, the information in this manual must be followed to minimize the risk
of fire or explosion, electric shock, or to prevent property damage, personal injury,
or death.
[] Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
[] Installation and service must be
performed by a qualified installer,
service agency or the gas supplier.
WHAT TO DO IF YOU SMELL GAS:
[]
Do not try to light a match, or
agarette, or turn on any gas or
electrical appliance.
[_ Do not touch any electrical switch;
do not use any phone in your building.
[_ Immediately call your gas supplier
from a neighbor's phone. Follow the
gas supplier's instructions carefully.
[_ If you cannot reach your gas supplier,
call the fire department.
[-_ Clear the room, building or area
of all occupants.
California Safe Drinking Water and Toxic Enforcement Act
This act requires the governor of California to publish a list of substances known to the state to cause cancer,
birth defects or other reproductive harm and requires businessesto warn customers of potential exposure to
such substances.
Gasappliances can cause minor exposure to four of these substances,namely benzene,carbon monoxide,
formaldehyde and soot, caused primarily by the incomplete combustion of natural gas or LPfuels.
Properly adjusted dryers will minimize incomplete combustion. Exposureto these substances can be
minimized further by properly venting the dryer to the outdoors.
%
PROPER INSTALLATION
This dryer must be properly installed and located in accordance with the Installation Instructions
before it is used. Installation Instructions are included in the back of this manual.
m Properly ground dryer to conform with all Exhaust/Ducting
governing codes and ordinances. Follow details
in Installation Instructions.
m Installor store where it will not be exposed to
temperatures below freezing or exposed to water
or weather.
m Connect to a properly rated, protected and sized
power supply circuit to avoid electrical overload.
m Removeall sharp packing items and dispose of
all shipping materials properly.
r_] Dryers MUSTbe exhausted to the outside to
prevent large amounts of moisture and lint from
being blown into the room.
r_--]use only rigid metal 4" diameter ductwork inside
the dryer cabinet. Use only rigid metal or flexible
metal/4-in diameter ductwork for exhausting to
the outdoors. Never use plastic or other
combustible, easy-to-puncture ductwork.
For complete details,follow the Installation
Instructions.
2