GE Profile DPVH890 Owner's Manual & Installation Instructions page 47

ge.com
PROBLEM Possible Causes What To Do
Small amount of water Inadequate load size for steam • Select a shorter cycle. Manually reduce cycle time
on floor in front of dryer cgcle selected, excess steam for given cycle.
condenses inside cabinet and
leaks out
Water on floorin back Loose water hose connection to • Tighten connection.
of drger valve
Hose missing rubber washer at • Install rubber washer provided with hose.
connection with valve
Dryer makes water Water valve is open filling steam • This is normal.
noises generator
Steam generator is dispensing • This is normal.
steam into drum
Water drips from door Steam condenses on inner door • This is normal.
when opened after
a Steam Cgcle
Cannot see steam at Steam released at different • This is normal.
beginning of cycle time in cycle
Garments still wrinkled Too many garments • Load fewer garments; manually increase time.
after steam cycle
Drger continues to Extend Tumble was selected • Ensure Extend Tumble option is not selected.
tumble after display
sags Complete
47