Configuring Advanced Settings; Advanced Settings For Connectors - Sharp eCopy ShareScan OP Configuration Manual

Configuring Advanced settings

You use the Advanced tab to specify default settings for connector-specific options, including
encryption, searchable text, and image format, and to specify whether the user can change the
settings at the eCopy-enabled device. The user-modifiable options are available when the user
presses Advanced
To configure the Advanced settings:
In the console tree, click the connector and then click the
1
2 Specify the desired settings (see "Advanced settings for connectors" on page 49).
Click , select or specify the profile name, and then click
3 Save
You can click Defaults

Advanced settings for connectors

The following table lists all available settings. Each connector supports a unique group of settings.
Encryption Disabled
(not
available
Always required
when Batch
File is
User modify
enabled)
Searchable Disabled
Text (not
available
Always required
when Batch
File is
enabled)
User modify
in the scan preview window.
to return the advanced settings to their original settings.
Document encryption will not be available for use with the
selected profile.
The user will be prompted to enter an encryption password
(only when the image format is PDF or eCopy).
The user will be able to encrypt documents at the device (only
when the image format is PDF or eCopy).
Searchable text will not be available for use with the selected
profile.
All scanned documents will be OCR'd and searchable text will
be embedded in the image file (only when the image format is
PDF or eCopy).
The user will be able to create searchable text at the device.
eCopy ShareScan OP Configuration Guide | 49
tab.
Advanced
.
Save