Table of Contents
Advertisement
34 | Configuring eCopy ShareScan OP
5
When you have selected all the target devices, click
To publish a profile:
1
In the
Manage
Select the desired profile for each target device.
2
3
Click
Publish
Before publishing the profiles, the Administration Console
> Makes a copy of all the required files in the base location specified in the Publish Connector
Profiles window.
> Creates a folder named "eCopyPublishingInfo" under the base location folder.
> Creates backup copies of current connector profiles on the target device, storing the copies
in the <installation_directory>\ShareScanOPManager\BackupConnectorProfiles folder on
the target device.
During publishing, the status for each device is updated. If an error message appears in the
Status column for the device, double-click it to retrieve details about the error.
If the profile includes a connector that is not supported on a target device, Publish ignores the
connector. For example, assume that you created a profile in which you included Copy,
Exchange, Quick Connect, Scan to Desktop, and Fax via Print. You want to publish this profile
to a ScanStation device and to an embedded device. Publish will ignore Copy when it publishes
to the ScanStation device and will ignore Fax via Print when it publishes to an embedded
device.
window, select the check box next to the target devices.
.
Done
.
Advertisement
Table of Contents
