Specifying An Exit Password; Configuring The Keyboard - Sharp eCopy ShareScan OP Configuration Manual

Specifying an exit password

By default, you can quit the client application on the ScanStation by pressing
pressing (if the client is configured to use a hard keyboard) or by pressing
Yes
pressing the Exit icon (if the client is configured to use the soft keyboard).
You can configure the client so that users must enter a password in order to quit the client
application.
To specify an exit password:
1 In the console tree, click
Click the
2 Settings
3 Under Application
Click .
4 Save
5 Click the Status

Configuring the keyboard

You can configure the client to use a hard keyboard or an on-screen (soft) keyboard. There are
several situations where you may want to enable the soft keyboard:
You are running ShareScan OP on an old ScanStation (black box).
■
You need to use a keyboard language other than English, French, Italian, German, or Spanish.
■
The client will support Danish, Dutch, English (UK), English (US), Finnish, French, German,
Italian, Norwegian, Portuguese, Spanish, and Swedish soft keyboards.
It is easier to secure the ScanStation when the soft keyboard is enabled.
■
Important! By default, the system keys — Ctrl+Alt+Del, Alt+Tab, Ctrl+Esc — are disabled and the
taskbar is hidden so that users cannot shut down the ScanStation PC or invoke the Start
menu. This ensures that users cannot access other applications. Authorized users can,
however, quit the client application (see "Specifying an exit password" on page 43).
To configure the keyboard:
In the console tree, click
1
Click the
2 Settings
Under
3 Keyboard
4 Click Save .
Click the
5 Status
Devices > device_name > Manage
tab.
, enter the exit password.
tab and then restart the client.
Devices > device_name > Manage
tab.
, select the hard keyboard or the soft keyboard option.
tab and then restart the client.
eCopy ShareScan OP Configuration Guide | 43
.
.
Esc and then
and then
About