Table of Contents
Advertisement
Configuring eCopy ShareScan OP
About configuring ShareScan OP
Configuring ShareScan OP involves
Licensing devices (see "About licensing devices" on page 5).
■
Managing connectors (see "Managing connectors and services" on page 10).
■
Managing devices (see "Managing devices" on page 14).
■
Managing the system (see "Managing the system" on page 19).
■
About licensing devices
Every device that you use with eCopy software requires a valid license. Obtaining a license involves
Entering a unique product key, valid for use with a single device, into the local license database
■
(see "Adding product keys" on page 6).
Adding an embedded device (see "Adding an embedded device" on page 8).
■
■
Activating the product key by obtaining a license code from the eCopy activation Web site (see
"Activating licenses" on page 9).
A product key must be added to the license database before the ShareScan OP Services Manager
can assign it to a device. When the key is assigned to a device, it is no longer available for use with
other devices. (However, you can assign the device to another Services Manager, in which case the
license moves with the device.)
The license information table displays the status of each product key in the database. If you are
using ShareScan OP on a ScanStation, a single product key will be listed.
eCopy ShareScan OP Configuration Guide | 5
Advertisement
Table of Contents
