Starting and Quitting
Opening Modes
Starting from the "Sharp Advanced Presentation Software
Professional Edition" icon in the Windows task tray
1
2
Starting from the Windows "Start" button
1
Before starting the software, make sure that the projector and the PC are
correctly set up. There are three ways to start up the software.
This icon appears when "Auto-Launch ON" is selected. See
for "Auto-Launch" setting.
Start up the projector.
Make sure to turn the projector on first. The computer should always
be turned on last.
The projector must be in IrCOM mode to receive the images. Press
the "IrCOM" button on the projector or the remote control.
For NV5/6/7 users:
To use infrared communications, select the "IrCOM" mode, referring
to the projector operation manual for details.
Start up the PC. Click the "Sharp Advanced Presentation
Software Professional Edition" icon in the Windows task
tray.
| The "Sharp Advanced Presentation Software Professional
Edition" window will open.
Start up the projector.
Make sure to turn the projector on first. The computer should always
be turned on last.
The projector must be in IrCOM mode to receive the images. Press
the "IrCOM" button on the projector or the remote control.
For NV5/6/7 users:
To use infrared communications, select the "IrCOM" mode, referring
to the projector operation manual for details.
20
page 22