Configuring Scanstation Logon Settings - Sharp eCopy ShareScan OP Configuration Manual

44 | Managing the ScanStation Client

Configuring ScanStation logon settings

To configure ScanStation logon settings:
In the console tree, click
1
Click the
2 ScanStation Logon
Under
3 Automatic Logon to Windows
>
Log on automatically at ScanStation startup with the following credentials
check box and then enter the user name, password, and domain information. When you
start or restart the PC, ShareScan OP automatically logs on to Windows using the logon
information.
>
Use preceding credentials to start/stop the ScanStation OP Client
check box, and specify the user name, password, and domain information, if you want to
start, stop, and restart the client from the administration console.
>
Automatically start ScanStation OP Client at startup (all users)
you want to start the ScanStation OP client as soon as a user logs on to the ScanStation or
after an automatic logon. If you are only using the specified logon information to start and
stop the client, users can log on to the ScanStation using credentials other than the ones
specified on this tab.
Click .
4 Save
When you are remotely connected to the administration console, you may find it useful to reboot
the ScanStation. To do this, click
ScanStation will display a warning that includes a 10 second waiting period.
Devices > device_name > Manage
tab.
, specify the desired options:
Reboot ScanStation
.
— Select this check box if
on the ScanStation Logon tab. The target
— Select this
— You must select this