The touch panel driver 2 starts automatically and the icon (
TIPS
• If PN-L703A/PN-70TA3 (or PN-L703B/PN-70TB3) and PN-L603A/PN-60TA3 (or PN-L603B/PN-60TB3) are connected at the
same time, selecting a setting item will display the screen where you can select the model to apply the setting to.
How to configure settings
nConfiguring settings from the menu bar
1. Click the touch panel driver 2 icon (
2. Click a menu to change a setting.
• Current Resolution: The model currently being used and the current screen resolution appear.
• Calibration: See page 7.
• Properties: See page 8.
• Hardware Information: H ardware information appears.
• Version Information: Shows the version of the touch panel driver 2.
• Disable TP Driver:
Select to disable the touch panel function.
To disable a single touch panel function, see "Function Setting". (See page 9.)
nConfiguring settings from System Preferences
1. Click "System Preferences" from the Apple menu (
2. Click "SharpTouchPanel2".
3. Click the menu and select settings.
Menu
TIPS
• If the "Show Setting Utility in menu bar" checkmark is removed, the touch panel driver 2 icon (
menu bar.
Touch Panel Settings
) on the menu bar.
).
) appears on the menu bar.
) does not appear on the
5
E