Table of Contents
Advertisement
FS6300 NMS User Manual
4. Click the Hard Reset button.
IMPORTANT
Set the factory default configuration
To set the factory default configuration for a device:
1. In the main menu tree under Network Maps, navigate to the Chassis or Card/Slot.
2. Right-click on the card's icon in the main window and select Operator Action. The Reset Options win-
dow appears. It shows the card model, IP address, and software revision of the card.
3. Select Set Factory Default Configuration from the menu tree in the Reset Options window.
4. Click the Set Factory Default Configuration button.
5. Click the Hard Reset button.
IMPORTANT
Managing Operator Actions
The Hard Reset process will reset ALL of the system's values to
the original factory settings. After resetting these values, the sys-
tem will continue to function the same until the system is reboo-
ted.
Figure 49. Set Factory Default Configuration
The Hard Reset process will reset ALL of the system's values to
the original factory settings. After resetting these values, the sys-
tem will continue to function the same until the system is reboo-
ted.
4 • Configuring and Managing Devices
61
Advertisement
Table of Contents
