Table of Contents
Advertisement
FS6300 NMS User Manual
3. Click on Modify Parameters to configure the alarms.
Modify Parameters: Configure the FS6300 Alarm Parameters through the Modify Parameters window.
– Alarm Syslog Priority
– Board Temperature Threshold
– Current Board Temperature
– Alarm Trap Managers 1-4
4. Click Modify to commit your configuration to the card. You will need to record the configuration to save
it to the card's volatile memory. (See
5. Return to the Alarm Systems Overview screen. Before the most severe active alarm is propagated to the
icons in the NMS, you must first do Steps 6-7.
6. Click on the Clear All Alarms button. You should receive a "Configuration Result" window indicating
success.
7. Click on the Refresh button.
8. Close the Alarm Details window.
9. Repeat Steps 2-8 for each card in the chassis. After this is completed, return to the view of the chassis in the
main NMS window.
Configuring the Alarm Trap Manager
Figure 34. Modify Alarm Details
"Record the current configuration"
3 • Configuring Alarms and Clocking
on page 60).
49
Advertisement
Table of Contents
