Table of Contents
Advertisement
FS6300 NMS User Manual
Introduction
The Patton Model 2616RC is a digital cross-connect with 16 T1/E1 ports. There are several ways to reach the
configuration menu for the 2616RC card:
•
Click on Network Maps in the main menu tree, then click on Chassis. Right-click on the 2616RC icon.
•
Navigate to Network Database > Managed Objects > Cards in the main menu tree, then right-click on the
IP address of the card in the table in the main window.
The best way to reach the configuration menu for a card is to select the card's chassis in the menu tree, then
right-click on the card's icon in the main window.
2616RC Configuration Menu
The following options are available in the pull-down menu for the 2616RC card:
•
Display T1E1 Map Layer – See
•
Card Overview – Shows information for Box Status, Card Info, and Alarm Info
•
Alarm Parameter Configuration – See
•
Card Front Panel GUI – See
•
Card System Clocking – See
•
Card System Configuration – See
Introduction
Figure 57. 2616RC Configuration Menu
"Viewing the T1/E1 Map Layer"
"Configuring Alarms through a Card in the Chassis"
"Viewing the Front Panel"
"Configuring Card System Clocking"
"Configuring the Card System"
5 • Configuring the 2616RC Card
on page 82
on page 69
on page 54
on page 69
on page 48
68
Advertisement
Table of Contents
