Table of Contents
Advertisement
FS6300 NMS User Manual
Edit CO/CPE Options
Click on CO Options or CPE Options in the menu tree of the Port Configuration window to view the line
provision rate, clock mode, payload rate, I-bits, annex type, transmit power, and EOC status.
To edit the CO/CPE options for a port:
1. Click on Modify CO Options or Modify CPE Options in the menu tree of the Port Configuration win-
dow.
2. Edit the desired, configurable options:
– Payload Rate: Select a rate fromt he drop-down menu. See
– Annex Type: Select Annex-A for North America or Annex-B for outside North America.
– Transmit Power: Select a value between +1–6dB to -1–6dB from the drop-down menu.
– Enable EOC: Select Yes (to enable EOC) or No (to disable EOC) from the drop-down menu.
3. Click Modify to save your changes.
Configuring G.SHDSL Ports
Figure 77. 3096RC Edit CO Options
6 • Configuring the 3096RC Card
"Determine Best Payload Rate"
on page 91.
90
Advertisement
Table of Contents
