FS6300 NMS User Manual
•
Ethernet Overview – See
•
Events and Alerts – See
•
G.SHDSL Port Configuration – See
•
G.SHDSL Report – See
•
IP Routing – See
"Configuring IP Routing"
•
Operator Action – See
•
PPP Configuration – See
•
System Log – See
"Viewing/Modifying System Log Configuration"
•
T1E1 Port Configuration – See
•
T1E1 Reports – See
•
Re-Discover Card – See
•
Ping – Displays a status message after pinging the interface.
Viewing the Front Panel
Click on Card Front Panel GUI to view the front panel of the card in real-time.
Configuring the Card System
Click on Card System Configuration to configure system parameters. You can also view the system status, eth-
ernet status, system parameters, SNMP and HTTP Parameters, and system status details.
Modify System Parameters
If you only want to view the system parameters, click on View System Parameters in the Card System Config-
uration window.
To configure the card system, click on Modify System Parameters in the menu tree in the Card System Con-
figuration window (see
Viewing the Front Panel
"Configuring Ethernet Settings"
"Viewing Events and Alerts"
"Configuring G.SHDSL Ports"
"Viewing G.SHDSL Reports"
"Managing Operator Actions"
"Configuring PPP"
"Configuring the T1/E1 Ports"
"Viewing T1/E1 Reports"
"Re-Discovering Cards Manually"
Figure 72. 3096RC Front Panel LEDs
Figure 71
on page 84).
on page 87
on page 62
on page 92
on page 93
on page 60
on page 95
on page 65
on page 99
on page 103
on page 38
6 • Configuring the 3096RC Card
on page 88
85