Table of Contents
Advertisement
FS6300 NMS User Manual
•
Ethernet Overview – See
•
Events and Alerts – See
•
E1 Link – See
"Configuring E1 Links"
•
IP Routing – See
"Configuring IP Routing"
•
Operator Action – See
•
SDH Configuration –
•
System Log – See
"Viewing/Modifying System Log Configuration"
•
Re-Discover Card – See
•
Ping – Displays a status message after pinging the interface.
Viewing the Front Panel
Click on Card Front Panel GUI to view the front panel of the card in real-time.
Configuring the Card System
Click on Card System Configuration to configure system parameters. You can also view the system status, eth-
ernet status, system parameters, SNMP and HTTP Parameters, and system status details.
Modify System Parameters
If you only want to view the system parameters, click on View System Parameters in the Card System Config-
uration window.
To configure the card system, click on Modify System Parameters in the menu tree in the Card System Con-
figuration window (see
Viewing the Front Panel
"Configuring Ethernet Settings"
"Viewing Events and Alerts"
on page 131
"Managing Operator Actions"
"Configuring SDH"
"Re-Discovering Cards Manually"
Figure 111. 6511RC Front Panel LEDs
Figure 112
on page 129).
on page 130
on page 62
on page 133
on page 60
on page 135
on page 38
8 • Configuring the 6511RC Card
on page 65
128
Advertisement
Table of Contents
