Table of Contents
Advertisement
FS6300 NMS User Manual
Configuring Cards
See the following chapters for detailed information on configuring specific cards:
•
2616RC – Chapter 5,
•
3096RC – Chapter 6,
•
3196RC – Chapter 7,
•
6511RC – Chapter 8,
Note
Although this guide supplies basic information for configuring cards in the
FS6300 NMS, you may also want to refer to the card's Administrator's Refer-
ence Guide and User Manual for more detailed information on installing and
configuring the card.
The following sections include procedures that are the same for all cards:
•
"Viewing Events and Alerts"
•
"Exporting the Configuration"
•
"Importing the Configuration"
•
"Viewing/Modifying System Log Configuration"
•
"Changing Alarm Status"
•
"Viewing/Modifying System Log Configuration"
Viewing Events and Alerts
Events are occurrences in the network, such as the discovery of an element, status update of an element, or a
filure of an element. Alarms/Alerts are a result of events in the network and they represent failures that require
immediate attention.
To view a color-coded chart that shows the amount of alarms and severity of alarms for the card, select Events
and Alerts from the card's configuration menu.
Configuring Cards
"Configuring the 2616RC Card"
"Configuring the 3096RC Card"
"Configuring the 3196RC Card"
"Configuring the 6511RC Card"
on page 62
on page 63
on page 64
on page 65
Figure 50. Card Events and Alerts
4 • Configuring and Managing Devices
on page 67
on page 83
on page 105
on page 126
on page 65
on page 65
62
Advertisement
Table of Contents
