FS6300 NMS User Manual
Introduction
The Patton Model 3096RC is a G.SHDSL TDM Concentrator with 16 G.SHDSL ports. There are several
ways to reach the configuration menu for the 3096RC card:
•
Click on Network Maps in the main menu tree, then click on Chassis. Right-click on the 3096RC icon.
•
Navigate to Network Database > Managed Objects > Cards in the main menu tree, then right-click on the
IP address of the card in the table in the main window.
The best way to reach the configuration menu for a card is to select the card in the main menu tree, then right-
click on the card's icon in the main window.
3096RC Configuration Menu
The following options are available in the pull-down menu for the 3096RC card:
•
Display G.SHDSL Map Layer –
•
Display T1E1 Map Layer – See
•
Card Overview – Shows information for Box Status, Card Info, and Alarm Info
•
Alarm Parameter Configuration – See
•
Card Front Panel GUI – See
•
Card System Clocking – See
•
Card System Configuration – See
Introduction
Figure 71. 3096RC Configuration Menu
"Viewing the G.SHDSL Map Layer"
"Viewing the T1/E1 Map Layer"
"Configuring Alarms through a Card in the Chassis"
"Viewing the Front Panel"
"Configuring Card System Clocking"
"Configuring the Card System"
6 • Configuring the 3096RC Card
on page 104
on page 103
on page 85
on page 54
on page 85
on page 48
84