FS6300 NMS User Manual
Introduction
The Patton Model 6511RC is a matrix switch with Gigabit Ethernet. There are several ways to reach the con-
figuration menu for the 6511RC card:
•
Click on Network Maps in the main menu tree, then click on Chassis. Right-click on the 6511RC icon.
•
Navigate to Network Database > Managed Objects > Cards in the main menu tree, then right-click on the
IP address of the card in the table in the main window.
The best way to reach the configuration menu for a card is to select the card in the main menu tree, then right-
click on the card's icon in the main window.
6511RC Configuration Menu
The following options are available in the pull-down menu for the 6511RC card:
•
Display E1Link VCx – See
•
Card Overview – Shows information for Box Status, Card Info, and Alarm Info
•
Alarm Parameter Configuration – See
•
Card Front Panel GUI – See
•
Card System Clocking – See
•
Card System Configuration – See
Introduction
Figure 110. 6511RC Configuration Menu
"Viewing E1Link Layers"
"Configuring Alarms through a Card in the Chassis"
"Viewing the Front Panel"
"Configuring Card System Clocking"
"Configuring the Card System"
8 • Configuring the 6511RC Card
on page 138
on page 128
on page 54
on page 128
on page 48
127