To Set The System; Language Setting; Power On Setting; To Return To Default Setting - Owon AG4151 User Manual

To Set the System

Language Setting

Press Utility and choose System, press F1 to switch between English/Chinese.

Power On Setting

(1) Press Utility and choose System, press F2 to select Power On.
(2) Press F2 to switch between Default/Last. Default means that all the settings return
to default when powered. Last means that all the settings return to the last one when
powered.

To Return to Default Setting

Press Utility and choose System, press F3 to select Set to Default. All the settings will
be set to default. The default settings of the system are as follows:
Output
Function
Frequency
Amplitude/Offset
Terminals
Modulation
Carrier
Modulating
AM Depth
FM Deviation
PM Phase Deviation
FSK Hop Frequency
FSK Frequency
PWM Width Deviation / Duty
Deviation
Source
Sweep
Start/Stop Frequency
Time
Mode
5.Front Panel Operation
Default
Sine Wave
1kHz
1 Vpp / 0 Vdc
High Z
Default
1kHz Sine Wave
100Hz Sine Wave
100％
100Hz
0°
100Hz
100Hz
0ns/0%
Internal
Default
100Hz/1kHz
1 sec
Linear
34