To Generate The Modulated Waveform; Am (Amplitude Modulation) - Owon AG4151 User Manual

Arbitrary waveform generator

Hide thumbs Also See for AG4151:

Quick manual (20 pages)

User manual (51 pages)

Table Of Contents

Table of Contents

(3) Set the interpolation: Press F2 to switch between On/Off. If you choose On, the

points will be connected with beelines; otherwise, the voltages between two

consecutive points will not change, and the waveform looks like a step-up one.

(4) Edit the waveform points: Press F3 to enter the operation menu.

Press F1 to choose "Points", input the number of the point to be edited.

Press F2 to choose "Voltage", input the voltage for the current point.

Repeat the step above, set all the points to your needs.

Press F4 to choose "Store", enter the file system. If a U disk is connected,

press the ◄ / ► direction key to select the storage. "USBDEVICE" is the U Disk

storage, "FLASH" is the internal storage. Choose Next level, enter the desired

storage path, choose Save, an input keyboard pops up, input the file name, and

then choose DONE.

How to Select a Stored Waveform

(1) Enter the operation menu: Press

(2) Enter the storage path of the desired waveform file. Press the ▲ / ▼ / ◄ / ►

direction key to select the desired waveform file.

(3) Choose Recall output.

How to Edit a Stored Waveform

(1) Enter the operation menu: Press

(2) Enter the storage path of the desired waveform file. Press the ▲ / ▼ / ◄ / ►

direction key to select the desired waveform file.

(3) Choose Recall suppress.

How to Delete a Stored Waveform

(1) Enter the operation menu: Press

(2) Enter the storage path of the desired waveform file. Press the ▲ / ▼ / ◄ / ►

direction key to select the desired waveform file.

(3) Choose OK, and then choose Delete.