Advertisement
5
4
6
Inset A
Figure
10
7
Figure 11
10----
11_
12 _
13 _
14"_
inset C
16
@
a.
b.
C.
d.
e.
Reverse
Release
the drive control bar
(fig. 10).
Move throttle
control
(fig. 1 O) to "SLOW"
speed
Place
shift
lever
indicator
(fig. 11 -inset A) in the "R"
(reverse)
position.
Do not stand
directly
behind
tiller.
Hold the drive control
bar against
the handle
(fig. 10) to
start tiller movement.
Tines will not turn.
_i,
WARNING!
Don't back yourself into a solid obstruction such as a tree,
fence, etc.
Stopping
tines
and engine
a. Tiller movement and tines will stop when drive control bar
(fig. 10) is released.
b.
Move shift lever indicator (fig. 11 -inset A) to "N" (Neutral)
position.
c.
To stop engine, move throttle control (fig. 10) to "STOP"
position.
Turning
a.
Release the drive controlbar (fig. 10).
b.
Move throttle control (fig. 10) to "SLOW" position.
c.
Place shift lever indicator (fig. 11 - insetA) in "F" (forward)
position.
Tines wilt not turn.
d.
Lift handle to raise tines out of the ground (fig. 10)
e. Swing the handle in the opposite direction you wish to
turn, being careful to keep feet and legs away from the
tines.
When you have completed your turn-around, lower the handle.
Place shift lever indicator in "T" (tilling) position and move
throttle control to desired speed. To begin tilling, hold drive
control bar against the handle.
Transporting
a.
Lower the depth stake to its lowest position and insert
the depth stake pin in the topmost hole.
b.
Place shift lever indicator (fig. 11 inset A) in "F" (foward)
position for transporting.
c.
Hold the drive control bar against the handle (fig. 10) to
start tiller movement.
Tines will not turn.
d.
Move throttle control (fig. 10) to desired speed.
4.
Drive control bar
5.
Handle
6. Throttle control
7.
Shift lever indicator
8.
Depth stake
9.
Depth Stake pin
10. Transport position
11. Shallowest tilling
12. Shallow tilling
13. Deep tilling
14. Deepest tilling
15. Depth stake
16. "Release" position
17. "Lock" position
23
Advertisement
