HP XP20000/XP24000 User Manual page 78

A mail server is required for email notice. The SMTP is used to send emails. You can choose whether
to use SMTP authentication. If a firewall is used, open port 25.
Only the storage administrator can perform operations in the E-mail Information window. The
Storage Administrator role must be set to Enable for that storage administrator's user account, and
also E-mail Information in the Permission Information list must be set to Enable.
To open the E-mail Information window, log in to Remote Web Console, and then select Go,
Environmental Settings and E-mail Information from the menu bar of the Remote Web Console
main window. Storage partition administrators cannot display the E-mail Information window.
Figure 38 E-mail Information Window
Item
Mail Notice
Mail Server
SMTP-AUTH
78 Using the Remote Web Console GUI
Description
Specify whether to report SIMs by email.
Enable: Reports SIMs by email.
Disable: Does not report SIMs by email.
Set an IPv4 address, an IPv6 address, or the host name of the mail server.
To set an IPv4 address, select IPv4 and enter four integers in the range of 0 to 255
(for example, nnn.nnn.nnn.nnn, where n is a number).
To set an IPv6 address, select IPv6 and enter eight hexadecimal numbers in the range
of 0 to FFFF (for example, hhhh:hhhh:hhhh:hhhh:hhhh:hhhh:hhhh:hhhh,
where h is a hexadecimal digit). Enter 0 to omit a segment.
To set a host name, select Host Name and enter up to 63 alphanumeric characters
(ASCII codes) and symbols, except for the following symbols and a space:
" \ ; : , * ? < > | / # & + = [ ] ' { } ^
Specify whether to use SMTP authentication.
Enable: Uses SMTP authentication.
Disable: Does not use SMTP authentication.