Figure 28 Identity Window
Item
Device Information
LDEV Information
Apply button
Cancel button
Device Information
Device Information, in the upper part of the Identity window, has the following features:
Item
Serial Number
IP Address
Device Name
62
Using the Remote Web Console GUI
Description
See
"Device Information" (page
See
"LDEV Information" (page
Implements all the changes or settings. This button is active only in Modify mode.
Closes the window without making changes or settings. This button is available only in
Modify mode.
Description
Serial number of the connected storage system.
IP address of the connected storage system (SVP).
Device name of the connected storage system. The Remote Web Console user can change
the device name with Modify mode.
Enter a device name using up to 180 alphanumeric characters (ASCII codes), except for
some symbols, such as ", \, ;, :, ,, *, ?, <, >, |, /, ^, &, and %. You can also use a
space, except for before and after the device name. If you enter a space before or after
the device name, an error occurs when you click Apply. The device name is required to
use SNMP Agent. For detailed information on SNMP, see the HP StorageWorks
XP24000/XP20000 SNMP Agent Reference Guide.
Make sure to document the device name because the settings will be cleared when the
SVP is replaced.
62).
63).