Windows Server 2003/2008 Initial Setup - HP XP20000/XP24000 User Manual

HP StorageWorks XP Auto LUN Software and XP Performance Control windows:
You cannot drag and drop objects on the XP Auto LUN and XP Performance Control
◦
windows. You must use the buttons instead.
If you select the icon for the Remote Web Console main window when you are using
◦
either XP Auto LUN or XP Performance Control, these windows may be wholly or partially
obscured behind the Remote Web Console main window. Before you can use the Remote
Web Console main window, close these windows by clicking the
the process. To continue the process, select the XP Auto LUN or XP Performance Control
window to bring it to the foreground.
The Close button ( ) on the XP Auto LUN or XP Performance Control window remains
◦
active even if you click Apply and the processing is being executed. If you click the
button after clicking Apply, the window closes but processing continues.
For the first two operations only, the word Loading... is displayed on the message box
◦
of the XP Auto LUN and the XP Performance Control window. This message does not
appear for the third and later operations.
When you use the Remote Web Console on UNIX workstations:
You cannot drag and drop objects on the LUN Manager window. You must use the buttons
instead.
When you use the Remote Web Console on HP-UX workstations:
If you select any part of the Remote Web Console main window while a dialog box is
displayed, that dialog box may be wholly or partially obscured behind the Remote Web
Console main window. Before you can use the Remote Web Console main window, close
the obscured dialog box first.

Windows Server 2003/2008 Initial Setup

If you are using a Windows Server 2003/2008 computer, the following operations are necessary.
When you use the Remote Web Console for the first time, perform the following operation in
Internet Explorer before using the Remote Web Console.
1. Select Tools and then Internet Options from the menu bar of Internet Explorer.
The Internet Options dialog box appears.
2. Click the Advanced tab. The Advanced dialog box appears (see
3. Clear the Do not save encrypted pages to disk check box.
4. Click OK to close the Advanced dialog box.
32 Installation Requirements and Procedures
button. This terminates
Figure 9 (page 33)).