Configuring Communications Over Only Ipv6 - HP XP20000/XP24000 User Manual

Figure 6 Temporary Files Settings Dialog Box (for JRE 6.0 earlier than Update 10)
Figure 7 Temporary Files Settings Dialog Box (for JRE 6.0 Update 10 or later)

Configuring Communications over only IPv6

IPv6 can also be used for communications between a Remote Web Console computer and an SVP.
To communicate over only IPv6, both a Remote Web Console computer and an SVP must be
configured to use only IPv6 for communications. For information on how to configure an SVP,
contact HP technical support (see "Calling HP Technical Support" (page 138)).
To use both IPv4 and IPv6 for communications, do not apply the setting described in this section.
In this case, IPv4 has a priority over IPv6.
This section explains how to configure a Remote Web Console computer when its operating system
is Windows Vista or Solaris 10. For other operating systems, contact the appropriate developers.
For Windows Vista
Setting Up Remote Web Console 27