Cflset Command - HP XP20000/XP24000 User Manual

Description
The CFLGET command saves the storage system information requested from the input file into a
separate spreadsheet.
Two types of files are stored in the directory.
A file containing the execution result (the file name is input-file-name_Result.spd)
Files containing the storage system information (the names of the files are written in
input-file-name_Result.spd)
Operands
Operand
input-file-name
output-file-name
Example
When the following example for Windows is executed, the configurations specified in the file
ExternalStorage_Get.spd is exported to the C:\CFLoutput directory. This directory stores
output files such as ExternalStorage_Get_Result.spd.
CFLGET ExternalStorage_Get.spd C:\CFLoutput
For UNIX, add .sh to CFLGET (that is, CFLGET.sh).

CFLSET Command

Syntax
CFLSET input-file-name
Description
The CFLSET command applies the configurations in the spreadsheet to the storage system. The
execution result will be saved in the output file that you specify when you execute the CFLSET
command.
HP recommends that the CFLCHK command be executed before executing the CFLSET command.
Even though the CFLCHK command verifies that the spreadsheet has no errors, errors might occur
in the following cases when you execute the CFLSET command:
When a communication error occurs
When volumes or pairs are not ready to accept any configuration changes
When another user is manipulating the storage system in Modify mode
126 Using the CFL Extension
Description
Specifies the name of the spreadsheet that contains the
information you want to save, including a relative path or
an absolute path. The maximum length of the file name is
240 characters.
Specifies the directory that stores output files, including a
relative path or an absolute path. The maximum length of
the directory name is 150 characters.
output-file-name