>dlnkmgr view -path -stname | find "AMS" | find "0A"
The above command will display information pertaining to only those
paths that pass through the specified CHA port.
set (Sets Up the Operating Environment)
The dlnkmgr command's set operation sets the HDLM operating
environment.
Format
To Set the Host Operating Environment
dlnkmgr [-s host-name -u user-name -p password] set
{-lb on -lbtype {exrr|exlio|exlbk|vmwmru|vmwrr}
|-iem { on [-intvl error-monitoring-interval] [-iemnum number-
of-times-error-is-to-occur] | off}
}
[-s]
To Set the Remote Management Client Operating Environment
dlnkmgr -l set
{-lic
|-audlog {on [-audlv audit-log-data-collection-level] [-
category [[ss] [a] [ca] [all]]|off}
}
[-s]
To Display the Format of the Set Operation
To display the format of the operation for both a host and remote
management client:
dlnkmgr set
-help
To display the format of the operation for a host:
dlnkmgr -s host-name -u user-name -p password set
-help
To display the format of the operation for a remote management client:
dlnkmgr -l set
-help
Command Reference
Hitachi Dynamic Link Manager User Guide (for VMware(R))
6-15